Development and Performance Evaluation of an Automatic Fish Feeder

Authore(s) : Ogunlela AO and Adebayo AA || Department of Agricultural and Biosystems EngineeringUniversity of IlorinIlorin Nigeria.

Volume : (13), Issue : 205, March - 2018

Abstract : Aquaculture, the process of raising aquatic animals in ponds, is gaining more attention in recent times. The feeding system is an important aspect of aquacultural practice. A simple, relatively inexpensive automatic fish feeder was designed, constructed and evaluated. The operation of the feeder does not require highly technical expertise. This paper reports the design considerations, materials used and the effectiveness of the device, based on analysis of manual feeding and automatic feeding. The main features of the device are: hopper (stainless steel), bi-directional motor, feed platform and electrical control box. The design was based on specific parameters which included capacity of culture tank, stocking density, fish biomass, diameter of the feed, angle of repose and bulk density (of the feed). The total cost of the device was 17,000 naira (approx. 106 U.S. dollars). The device was tested under two culture tanks (0.75 m3 each) with 10 kg-33 juvenile cat fish (Clarias gariepinus) placed in each tank with one feeding automatically and the other, manually. The feeder evaluation was based on feed conversion ratio (FCR) and feeding efficiency (FE). The total average gain in weight per fish was higher in the automatic feeding (89.50 g) than in manual (78.50 g). An FE of 20.9% was obtained in the automatic feeding and 18.6% in manual, in relation to their FCRs. A t-test,conducted at 5% significance level, indicated a significant difference in the two feeding methods.  

Article: Download PDF Journal DOI : 301/704

Cite This Article:

Article No : 10098

Number of Downloads : 113

References :

Aderolu AZ, Seriki BM, Apatira AL, Ajaegbo CU (2010) Effects of feeding frequency on growth, feed efficiency and economic viability of rearing African catfish (Clarias gariepinus, Burchell 1822) fingerlings and juveniles. African Journal of Food Science 4: 286-290. Mohapatra BC, Sarkar B, Sharma KK, Majhi D (2009) Development and Testing of Demand Feeder for Carp Feeding in Outdoor Culture System. Agricultural Engineering International,... More

1. Aderolu AZ, Seriki BM, Apatira AL, Ajaegbo CU (2010) Effects of feeding frequency on growth, feed efficiency and economic viability of rearing African catfish (Clarias gariepinus, Burchell 1822) fingerlings and juveniles. African Journal of Food Science 4: 286-290.
2. Mohapatra BC, Sarkar B, Sharma KK, Majhi D (2009) Development and Testing of Demand Feeder for Carp Feeding in Outdoor Culture System. Agricultural Engineering International, the CIGR EJournal.
3. Varadi L (1984) Mechanized feeding in Aquaculture. Inland Aquaculture Engineering. Food and Agriculture Organization (FAO). Fisheries and Aquaculture Department.
4. Tadayoshi, Nagatomi (2003) Automatic Fish Feeder with Uneaten Feed Sensor for Environmental Preservation. Yamaha Mot Tech Rev.
5. Noor MZH, Hussain AK, Saad MF, Ali MSAM, Zolkap M (2012) The design and development of automatic fish feeder system using PIC microcontroller. Control and System Graduate Research Colloquium (ICSGRC), 2012 IEEE.
6. Anyadike CC, Eze M, Ajah GN (2010) Development of an automatic fish feeder.Journal of Agricultural Engineering and Technology 18: 29-36.
7. Gregory JM, Feldler CB (1987) Equation describing granular flow through circular orifices. Transactions of the ASAE 30: 529-532.

... Less